Brinkmann 810-8532-S, 810-8552-S, 810-8640-S 810-8750-S & 810-8752-S, Conversion Instructions

CONVERSION

INSTRUCTIONS

810-8750-S & 810-8752-S

CAUTION: Some parts may contain sharp edges. Wear protective gloves if necessary.

WARNING: Only use the specific

orifice designated for your grill model. Always double check the millimeter size on the side of the orifice tip prior to installation. Use of any other orifice could lead to personal injury, property damage and void your grill warranty.

Note: Make sure all control knobs are in the off position, LP tank valve is closed and tank is disconnected from regulator and removed from grill.

Step 1

Pull right accessory drawer out and remove. Set drawer aside until you are ready to re-insert drawer at the end of Step 2.

Step 2

Hold the gas manifold connection with an adjustable wrench and use a 3/4” wrench to undo hose connection from gas manifold. Attach 10’ hose to gas manifold. Tighten connection carefully using two wrenches.

Step 3

Open covers and remove cooking grills and heat shields. Set aside for later use.

Right

Accessory

Drawer

Gas Manifold

Connection

10’ Natural Gas Hose

Cooking Grills

Heat Shields

9