Wood Chip Drawer
Side View
Fire Box Front Panel
Gas Orifice Tool
LP Gas Orifice
Tab | Stop Plate |
|
Stop Pin
Figure 1 | Figure 2 |
Step 4
Remove two screws from each burner "foot" using a screwdriver. Remove wood chip drawer to get access to the wood chip burner. Remove one screw from the wood chip burner. Carefully lift each burner up and away from valve openings. Set aside for later use.
Step 5
Using the gas orifice tool, remove the LP brass orifice from the tip of each gas valve assembly. Repeat this step for all main burner and wood chip burner valves in your grill.
Note: All orifices of the grill, except rotisserie, are double orifices type (LP gas and natural gas). You only remove the LP gas orifice tip.
Step 6
Remove all the control knobs from the control panel and set aside for later use.
Step 7
Figure 1 shows valve stem and bezel with both screws. Place stop plate over valve stem as shown in Figure 2. Verify the tab and the stamped letter on the stop plates face out. Replace control knobs when finished.
WARNING: We recommend and request that you do not remove the control panel in order to access the valve tips. If you choose to remove the control panel, you must replace the control panel bezels exactly as illustrated in Figure 2. Failure to replace the bezels as illustrated could lead to personal injury and/or property damage.
6
