810-8905-S & 810-8907-S SIDE BURNERS
CAUTION: Only use specified natural gas orifice for your grill.
Step 8
Remove the side burner brass cap by using the small wrench to unscrew the two small screws.
Step 9
Remove access panel on left side of grill for better view of gas orifice.
Step 10
Use the gas orifice tool to remove LP brass orifice from the hole on the top of side burner.
Step 11
Using gas orifice tool, install 1.25mm (GREEN) natural gas orifice. Be careful not to cross thread natural gas orifice.
Existing Side Burner LP
Gas Orifice
Replacement Side Burner
Natural Gas Orifice
(identified by number)
Side Burner 1.25mm (GREEN)
1.25mm
Step 12
Replace the side burner brass cap to the burner.
Small Wrench
Brass Cap
Access Panel
Gas Orifice Tool
7
