Small Wrench
Brass Cap
Access Panel
Gas Orifice Tool
810-8750-S & 810-8752-S SIDE BURNERS
CAUTION: Only use specified natural gas orifice for your grill.
Step 8
Remove the left side shelf by unscrewing the four bolts.
Step 9
Remove the side burner brass cap by using the small wrench to unscrew the two small screws.
Step 10
Remove access panel on left side of grill for better view of gas orifice.
Step 11
Use the gas orifice tool to remove LP brass orifice from the hole on the top of side burner.
Step 12
Using gas orifice tool, install 1.35mm (RED) natural gas orifice. Be careful not to cross thread natural gas orifice.
Existing Side Burner LP
Gas Orifice
Replacement Side Burner
Natural Gas Orifice
(identified by number)
Side Burner 1.35mm (RED)
1.35mm
Step 13
Replace the side burner brass cap to the burner.
12
