CONNECTING THE P-TOUCH TO A COMPUTER
This machine is equipped with an interface connector, allowing you to print labels and stamps that you have created with the
To connect the P-touch to the computer:
1Turn off both the
2Insert the small plug on the interface cable into the interface connector on the right side of the
☞Only use the interface cable designed exclusively for this machine.
3On an IBM
On a Macintosh: Insert the
4Turn on the
Interface
5 Hold down Code and press ? | to enter Interface mode. |
. | ' |
☞In Interface mode, the baud rate of the
Style | |
Code and pressing $ | until the desired setting appears (57600 bps, 115200 bps, |
4 |
|
or 9600 bps). Release the keys to apply the desired setting.
7