Brother 2410 To input the shelf number the first block of text, To create a new block of text

ENTERING THE TEXT

Now, we can begin entering the text for our storage shelf label.

To input the shelf number (the first block of text):

3Type in “B1”.

	Length
1: B 1 _	Undl/Frm
	A.Format
	Width

Each time the number of lines in a section of the text changes, a new block of text must be cre- ated. Therefore, the text for our label must be entered in three separate blocks.

Since we will now change from a one-line to a three-line block, we will use the New block function instead of a normal return. The new block mark ( ) indicates the end of a block. For more details on the New block function, refer to NEW BLOCK FUNCTION on page 54.

To create a new block of text:

New Block

4 Hold down Code and press

once.

1: B 1	Length
	Undl/Frm
1: _	A.Format
	Width

To enter the company address (the second block of text):

5Type “ABC Transport”, and then press

New Block

.

1: A B C T r a n s p o	Length
	Undl/Frm
2: _	A.Format
	Width

39