Error Message | Cause | Remedy |
|
|
|
CAN’T | This message appears if the cursor is | Move the cursor below a |
HERE! | at the end of the text when you hold | number before holding down |
| down cand press O. | cand pressing O. |
|
|
|
CASSETTE | This message appears if the tape cas- | Cancel the print job, install the |
CHANGED! | sette is changed while the | correct tape cassette, and then |
| receiving data from the computer. | try printing again. |
|
|
|
CHANGE | This message appears if a | Remove the |
ADAPTOR! | age adapter is being used. | adapter and connect the adapter |
|
| designed exclusively for this |
|
| machine. |
|
|
|
CUTTER | This message appears if the tape cut- | Turn the |
ERROR! | ter is closed when you try to print or | again. |
| feed the tape. |
|
|
|
|
EEPROM | This message appears if a checksum | Contact your service representa- |
ERROR! | error occurred when the | tive. |
| turned on or if the keyword was dam- |
|
| aged and failed to initialize. |
|
|
|
|
FEED | This message appears if the AV label | • Replace the AV label cassette |
ERROR! | sensor cannot detect the labels. | with one that is not empty. |
|
| • If this error message appears |
|
| even after a new AV label cas- |
|
| sette is installed, the sensor |
|
| may be damaged. Contact |
|
| your service representative. |
|
|
|
INPUT | This message appears if the set | Input the correct number of dig- |
WHOLE CODE | number of digits is not entered in the | its or change the number of dig- |
| barcode data. | its set in the barcode parameters. |
|
|
|
109