TZ | AV |
DELETE KEY
The Delete (backspace) key ( *) allows you to remove characters to the left of the cursor’s current position. It differs from the left cursor key ( f), which only moves the cursor without deleting any characters.
The delete key can also be used to quit most functions and return to the previous display without changing the text.
Some questions asking you to confirm a command may appear on the LCD display, especially when the function that you have chosen will delete or affect files. In these cases, pressing * is like answering “no”.
☞To answer “yes”, press _. Refer to RETURN KEY on page 47.
To delete one character:
1Press f, w, eor hto position the cursor below the character immediately to the right of the character that you wish to delete.
2Press *once.
To delete a sequence of characters:
1Press f, w, eor hto position the cursor below the character immediately to the right of the last character that you wish to delete.
2Hold down *until all of the characters that you wish to delete are deleted.
To quit a function without changing your text:
●Press *to return to your text.
To answer “no”:
●Press *.
TZ | AV |
LINE OUT FUNCTION
With the Line Out function, you can easily remove an entire line of text.
To delete a line of text:
1Press f, w, eor hto position the cursor within the line of text that you wish to delete.
52