TZ | AV |
NEW BLOCK KEY
In order for one section of the text to have a different number of lines than the rest of the text or in order to apply a different format to a section of the text (Refer to LOCAL FORMAT FUNCTION on page 74.), a new block must be created using the New Block function.
☞A single label can only contain a maximum of five blocks. If the cursor is located in the fifth block when cis held down and _is pressed, the error message “5 BLOCK
LIMIT!” appears.
If the cursor is positioned in the middle of a text block when cis held down and
_is pressed, the block splits into two and the character to the left of the cursor’s current position becomes the end of the block.
To add a new block:
●Hold down cand press _once. The new block mark ( 
) appears in the text to indicate the end of the block.
EXAMPLE
To add a new block:
1: K ’ s b a r _
● Hold down cand press _once.
1: | K ’ s b a r |
1: | _ |
49