CONNECTING THE P-TOUCH TO A COMPUTER

This machine is equipped with a USB port, allowing you to connect the P-touch to your IBM PC-compatible or Macintosh computer, and print labels and stamps created using the P-touch Editor software.

☞The P-touch Editor software and the printer driver must be installed before the P-touch is connected to the computer or turned on. Follow the installation procedure on pages 7 through 40 to install the P-touch Editor software and the printer driver, and connect the P-touch to the computer when you are instructed to do so.

Only use the enclosed USB interface cable to connect the PT-2600/2610 to the com- puter.

To connect the P-touch to the computer:

1Insert the flat (A) connector on the USB cable into the USB port on the computer.

2Insert the square (B) connector on the USB cable into the USB port on the right side of the P-touch.

3Turn on the P-touch.

☞When making a USB connection through a hub, a proper connection may not be possi- ble due to the type of hub used. If printing is not possible with a hub connection, try connecting the PT-2600/2610 directly to the computer using the USB interface cable.

USB interface cable

USB port

6