5Double-click the P-touch Editor 3.2 folder to open it.

6Double-click the P-touch Editor 3.2 Installer icon in the folder that appears. The installer starts up.

7Select the installation method.

•For a basic installation

Clicking the Install button immediately starts installing the all options.

☞About 20 MB of available hard-disk space is needed to begin installation. In order to install all options, about 100 MB of available hard-disk space is needed. If enough hard-disk space is available, click the Install button.

•For a custom installation

Clicking the Custom Install button displays a dialog box that allows you to select which options to install.

Only the options with a check mark beside them are installed. Select the options that you wish to install, and then click the Install button.

☞In order to print from the P-touch 2600/2610, “PT-2600/2610 Driver” must be selected for installation.

If certain options are not installed,

some P-touch Editor functions may not be available.

8When the dialog box appears, indicating that the installation is finished, click the Quit button.

20