Using your machine with a Macintosh®
7 - 14
7
Scanning an image into your Macintosh®
You can scan a whole page.
OR
scan a portion after pre-sca nning the document.

Scanning a whole page

1Load your document in the ADF.
Note
If your model is a flatbed type, you can also place your document on the scanner glass.
2Adjust the following setti ngs, if needed, in the Scanner Setup d ialog box:
Resolution
Color Type
Scanning Area
Brightness
Contrast
3Click Start.
When scanning has finished, the image will appear in your graphics application.