Starting/Ending Position Settings 125

——
————————————————————————————————————————————————————————————
—
——————————————————————
4
Embroidering linked characters
Follow the procedure described below to
embroider linked characters in a single row when
the pattern extends beyond the embroidery f rame.
Example: Linking “DEF” to the characters “ABC”
1Select the character patterns for “ABC”.
2In the embroidering settings screen, touch
.
3Touch .
XThe needle bar is positioned in the lower-
left corner of the pattern. The embroidery
frame moves so that the needle is
positioned correctly.
Note
●To cancel the starting point setting and
return the starting point to the center of the
pattern, touch .
●Use to select a different st arting
point for embroidering.
4Touch to return to the embroidering
settings screen, and then touch to
continue to the embroidering screen.
X changes to while the starting
point is set in the lower-left corner of the
pattern.
5Touch , and then press the start/
stop button to begin embroidering.
6After the characters are embroidered, cut
the threads to a generous length, remove the
embroidery frame, and then attach the
embroidery frame again so that the
remaining characters (“DEF”) can be
embroidered.
1End of the embroidering
7As in step 1, select the character patterns
for “DEF”.