116
EMBROIDERY — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —
eLoosen the presser foot holder screw and
remove the presser foot holder.
Turn the screwdriver toward the back.
aScrewdriver
bPresser foot holder
cPresser foot holder screw
XRemove the presser foot holder.
fSet the bar on the embroidery foot onto th e
needle clamp screw bar.
aEmbroidery foot bar
bNeedle clamp screw
gSecure the embroidery foot with the presser
foot holder screw.
Set the embroidery foot perpendicular.
hTighten the presser foot holder screw.
Turn the screwdriver toward the front.
CAUTION
1
2
3
1
2
●Do not hit the needle with your finger or
the embroidery foot "Q" when attaching
it. The needle might break or cause injury.
●Be sure to tighten the screw with the
included screwdriver. If the screw is
loose, the needle might hit the presser
foot and break or bend.
●Before sewing, always turn the balance
wheel toward you slowly, and check to be
sure that the needle does not hit the
presser foot. The needle could be broken
or bent.