142
EMBROIDERY — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —
Thread runs out partway through a design
When the upper thread or the bobbin thread runs out
while sewing, the sewing machine stops. Move the
needle back about ten stitches and resume sewing.
aSet up the upper or bobbin thread.
bPress .
cPress (Back one stitch) to move the
needle back about 10 stitches.
(Forward one stitch) increases the stitch
number.
dRestart the embroidery.
Stopping while embroidering
If the embroidery is stopped before it is complete,
check the current needle count before turning off the
sewing machine.
Memo
zWhen the sewing machine is turned off, the
embroidery size and layout return to the
original setting.
aPress (Start/stop button) to stop the
sewing machine.
bCheck the current needle count on the LCD
and make a note of it.
If the needle count is not displayed, press
(Settings key) to switch the display.
Press (Back key) to return to the embroidery
screen.
cPress (Embroidery key).
XThe screen for checking the pattern is
displayed.