GETTING READY — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —
30
eInsert the thread cassette (with the extra spool
pin attached) into the thread cassette
compartment.
• For more details, refer to step e in "Using
the extra spool pin" (page 27).
XPass both threads through the needle bar
thread hooks.
• If the thread cassette is inserted with the twin
needle attached, the sewing machine may be
damaged.
fInstall the twin needle.
• For details, refer to "Replacing the needle"
(page 35).
gManually thread the left needle with the
thread for the left side of the stitch.
• For details, refer to "Thread the needle
manually (without using the needle threader)"
(page 28).
hRemove the thread for the right side of the
stitch from only the lower hook of the needle
bar thread hooks, and then use it to thread the
right needle.
iAttach zigzag foot "J".
• For details on changing the presser foot, refer
to "Replacing the Presser Foot" (page 38).
CAUTION
jTurn on the sewing machine and select a
stitch.
• For stitch selection see "Selecting stitching"
(page 45).
• See "Stitch Settings" (page 64) for stitches that
use a twin needle.
CAUTION
kPress (Settings key) in the operation
panel.
XThe settings screen appears.
lPress .
X displays in reverse highlight.
• If pressed again, it returns to .
XThe twin needle can now be used.
●When using the twin needle, be sure to attach zigzag foot "J", otherwise the needle may break or the machine may be damaged.●When using the twin needle, be sure to select an appropriate stitch, otherwise the needle may break or the machine may be damaged.