SEWING BASICS — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —
58
dSet the fabric in place, and press (Start/
stop button) once.
XStitching starts after reverse stitching or
reinforcement stitching.
eOnce you have reached the end of the
stitching, press (Reverse/reinforcement
stitch button) once.
If stitching, such as buttonholes and bar
tacking, that includes reinforcement stitching
has been selected, this operation is
unnecessary.
XAfter the reverse stitching or reinforcement
stitching has been done, the sewing machine
stops, and the thread is cut.
Memo
zProgrammed thread-cutting will not be
performed if the start/stop button is pressed
while sewing. Press the reverse/
reinforcement stitch button at the end of the
stitching.
zIf the power is turned off, programmed
thread-cutting will be turned off.
Mirroring stitches
You can sew the mirror image of a stitch horizontally
(left and right).
aTurn on the sewing machine.
XThe LCD comes on.
bSelect a stitch.
• For details on selecting a stitch, refer to
"Selecting stitching" (page 45).
cPress on the LCD.
XIt turns to , and the pattern is mirrored.
• To turn the mirrored stitching off, press .
Memo
zMirroring is not possible for buttonholes and
other stitches where shows.
zWhen the sewing machine is turned off, the
mirroring setting is cancelled.
1
The thread is cut here.