Brother Computerized Embroidery Sewing Machine Replacing the Needle 37

Replacing the Needle 37
1
— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —
cUsing the screwdriver, loosen the needle
clamp screw.
dLower the needle-changing tool.
XThe needle can be removed from the needle
bar.
eInsert the new needle into the hole in the
needle-changing tool.
Insert the needle with the flat side of the needle
toward the rear of the machine.
fLift up the needle-changing tool so that the
fork hooks onto the needle clamp screw.
gInsert the needle until it touches the needle
stopper, and then use the screwdriver to
tighten the needle clamp screw.
XThe needle is installed.
hLower the needle-changing tool off of the
needle.
Note
zThe needle-changing tool can not be used
for the twin needle.