Attaching the embroidery unit 119
4
— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —
cOpen the cover of the embroidery unit con-
nector slot, which is on the left side of the sew-
ing machine arm.
Pull the cover open toward you and then push
it all the way back into the slot.
aEmbroidery unit connector slot
bCover
CAUTION
dSlide the embroidery unit onto the sewing
machine arm.
Push it in until it clicks and stops.
XThe embroidery unit is attached.
eTurn on the sewing machine.
XA message will be displayed on the LCD.
fBe sure that no objects or hands are near the
embroidery unit and touch on the LCD.
• When an animation is displayed on the LCD,
the message above will be displayed if you
touch the LCD with your finger.
XThe embroidery unit carriage moves to its
initial position.
aCarriage
●Push the cover all the way back into the
slot. If the embroidery unit is attached
without the cover being pushed all the
way in, it could be the cause of
malfunctions.
2
1
1
2
1