UTILITY STITCHES
A decorative stitch can be sewn by changing the stitch width of a satin stitch. If the sewing machine is set so that the stitch width can be adjusted using the sewing speed controller, the stitch width can quickly and easily be adjusted. In this case, the sewing speed is adjusted with the foot controller.
aConnect the foot controller.
•For details, refer to “Starting to sew” (page 52).
bAttach zigzag foot “J”.
J
•For details, refer to “Replacing the presser foot” (page 41).
cTurn on the sewing machine, and then press 
(Settings key) in the operation panel.
XThe settings screen appears.
dPressis displayed.or 
(Stitch length keys) until 
XThe screen for specifying that the stitch width can be controlled with the sewing speed controller appears.
ePress. 
or 
(Stitch width keys) to select
To return to 
, press 
or 
(Stitch width keys).
XThe machine is now set so that the stitch width can be controlled with the sewing speed controller.
fPresskey). 
(OK key) or 
(Cancel/clear
XThe initial stitch screen appears again.
gSelect stitch 24 
.
•For details, refer to “Selecting stitching” (page 72).
hWhile sewing, slide the sewing speed controller to adjust the stitch width.
Slide the controller to the left to make the width narrower. Slide the controller to the right to make the width wider.
Narrower Wider
•Adjust the sewing speed with the foot controller.
106