UTILITY STITCHES ———————————————————————————————————————————

Entering the pattern data

Follow the pattern drawn on the grid sheet and program the pattern into the sewing machine.

aAttach monogramming foot “N”.

•For details, refer to “Replacing the presser foot” (page 41).

bTurn on the sewing machine.

cSelect (No. 99 of , selected with ).

Press (Decorative stitch key), and then use the numeric keys to type in “99”.

XThe screen for entering a pattern appears.

1

23

aNumber of the current point/Total number of points

bHorizontal coordinate (0–79)

cVertical coordinate (0–14)

dCheck the grid sheet set, and specify the coordinates of the first point.

Press and (Stitch width keys) to select

the horizontal coordinate and press and (Stitch length keys) to select the vertical

coordinate, and then press (OK key).

2

1

aStitch width keys

bStitch length keys

eSpecify the coordinates of the second point,

and then press (OK key).

XA screen appears, allowing you to specify the settings for the stitching between the two points.

fSpecify whether single stitching or triple stitching will be sewn between the points.

Press and (Stitch width keys) to select

for single stitching or for triple stitching,

and then press (OK key).

XA screen for selecting the next operation appears.

134