gSelect 
, and then press 
(OK key).
•If you make a mistake while specifying a
point, press 
(Cancel/clear key) so that
the point changes from 
to 
, and then move (edit) the position of the point.
XA screen for specifying the next point appears.
hRepeatpoint. steps e through g to specify each Up to 99 points can be entered.
■To edit the position of a point.
The position of a point can be edited (moved) if
(Cancel/clear key) is pressed while 
is displayed in the screen so that the point
changes from 
to 
. Each time 
(Cancel/clear key) is pressed, the previous point is
selected. To select the next point, press 
(OK key).
■To delete a point
The last point can be deleted by pressing 
(0
key) while a point appears as 
in the screen
where 
is displayed. Each press of the key deletes the last point in the pattern.
iAfter all points in the pattern have been
specified, select in the screen that appears
in step g, and then press 
(OK key).
jSpecify the various stitching settings, such as reverse/reinforcement stitching, in the same way as with other stitches.
•With this screen displayed, pressing 
(Cancel/clear key) displays the screen where
points can be edited so that points can be added or removed.
Memo
z To save the entered pattern data, save it from | 3 |
the sewing screen. For details, refer to |
“Saving patterns” (page 130).
zThe pattern in the LCD will appear different from the pattern drawn in the grid sheet set and the actual sewn stitch. Also, refer to these when entering the design.
XThe sewing screen appears.
Designing a Pattern 135