Brother 885-U24, Computerized Sewing Machine Reinforcement Stitching, Bar tack stitching, Triple stretch stitching

UTILITY STITCHES ———————————————————————————————————————————

Reinforcement Stitching

Reinforce points that will be subject to strain, such as sleeve holes, inseams and pocket corners.

	Pattern	Numeric		Stitch Width		Stitch Length		Presser
Stitch Name		Key	Application	[mm (inch)]		[mm (inch)]
								Foot
				Auto	Manual	Auto	Manual
Triple stretch	04		Reinforcing the seams	0.0	0.0–7.0	2.5	1.5–4.0
			of sleeves and					J
stitch				(0)	(0–1/4)	(3/32)	(1/16–3/16)
			inseams
Bar tack	60		Reinforcing the ends	2.0	1.0–3.0	0.4	0.3–1.0
		–	of openings, such as
stitch				(1/16)	(1/16–1/8)	(1/64)	(1/64–1/16)
			the corners of pockets
	58	–	Darning medium	7.0	2.5–7.0	2.0	0.4–2.5	A
Darning			weight fabrics	(1/4)	(3/32–1/4)	(1/16)	(1/64–3/32)
stitch	59	–	Darning thick fabrics	7.0	2.5–7.0	2.0	0.4–2.5
				(1/4)	(3/32–1/4)	(1/16)	(1/64–3/32)

Triple stretch stitching

Use triple stretch stitching to reinforce sleeve holes and inseams.

aAttach zigzag foot “J”.

J

•For details, refer to “Replacing the presser foot” (page 41).

bSelect stitch 04 .

•For details, refer to “Selecting stitching” (page 72).

cStart sewing.

•For details, refer to “Starting to sew” (page 52).

Bar tack stitching

Bar tacks are used to reinforce points subject to strain, such as pocket corners and openings.

As an example, the procedure for sewing bar tacks at pocket corners is described below.

aDetermine the desired length of the bar tack. Set the button guide plate on buttonhole foot “A” to the desired length. (The distance between the markings on the presser foot scale is 5 mm (3/16 inch).)

1

2

3

aPresser foot scale

bLength of bar tack

c5 mm (3/16 inch)

•A bar tack with a maximum length of about 28 mm (1–1/8 inches) can be sewn.

108