————————————————————————————————————————————————————

Memo

zThe order that the bobbin thread should be passed through the bobbin case is indicated by marks around the bobbin case. Be sure to thread the machine as indicated.

The marks around the bobbin case differ depending on the model.

gWhile lightly holding down bobbin with your right hand as shown, guide the thread through the slit (a and b).

•At this time, check that the bobbin easily rotates counterclockwise.

Then, pull the thread toward you to cut it with the cutter (c).

2

Note

zMake sure that the thread is correctly inserted through the tension-adjusting spring

of the bobbin case. If it is not inserted

correctly, reinsert the thread.

1

 

 

 

 

 

1

aTension-adjusting spring

hReattach the bobbin cover.

Insert the tab in the lower-left corner of the bobbin cover, and then lightly press down on the right side.

2

1

XThe lower threading is finished.

Next, thread the upper thread. Continue with the procedure in “Upper Threading” (page 28).

3

1

Memo

aSlit

bCutter (Cut the thread with the cutter.)

zYou can begin sewing without pulling up the bobbin thread. If you wish to pull up the bobbin thread before starting to sew, pull up the thread according to the procedure in “Pulling up the bobbin thread” (page 36).

Winding/Installing the Bobbin 27