Loading photo paper

Note

In Canada, the photo bypass tray is called the photo paper tray.

Use the photo bypass tray, which is located on the top of the output paper tray cover, to print on Photo 4" ⋅ 6" and Photo L 3.5" ⋅ 5" size paper. When you use the photo bypass tray, you do not have to take out the paper that is in the tray beneath it.

a Squeeze the blue photo bypass tray release button (1) using your right index finger and thumb and push the photo bypass tray forward until it clicks into the photo printing position (2).

1

2

Photo Bypass Tray

Loading documents and paper

b Press and slide the paper side guides (1) and paper length guide (2) to fit the paper size.

12

2

c Put the photo paper into the photo bypass tray and gently adjust the paper side guides to the paper.

Make sure the paper side guides touch the sides of the paper.

Note

•Be careful that you do not push the paper in too far; it may lift at the back of the tray and cause feed problems.

•Always make sure that the paper is not curled or wrinkled.

13