PhotoCapture Center®: Printing photos from a memory card or USB Flash memory drive

Setting your changes as the new default

You can save the print settings you use most often by setting them as the default settings. These settings will stay until you change them again.

a Press a or b to choose your new setting. Press OK.

Repeat this step for each setting you want to change.

b After changing the last setting, press a or b to choose Set New Default. Press OK.

c Press + to choose Yes. d Press Stop/Exit.

Restoring all settings to the factory settings

You can restore all the settings you have changed to the factory settings. These settings will stay until you change them again.

a Press a or b to choose Factory Reset. Press OK.

b Press + to choose Yes.

c Press Stop/Exit.

Scan to a memory card or USB Flash memory drive

Entering Scan mode

When you want to scan to a memory card or

USB Flash memory drive, press (Scan). The LCD shows:

Scan to E-mail

 

Scan a document

 

5

Scan to Image

 

directly to a media

 

Scan to OCR

 

card or USB

 

 

Scan to File

 

flash

 

 

Scan to Media

 

memory.

 

 

 

 

 

 

 

 

 

Select & Press

OK

 

SCAN

 

 

Press a or b to choose Scan to Media. Press OK.

If you are not connected to your computer only the Scan to Media selection will appear on the LCD.

(See Scanning for Windows® or Macintosh® in the Software User’s Guide on the CD-ROM for details about the other menu options.)

49