Press Ink.
Cleaning the print head

To maintain good print quality, the machine will automatically clean the print head. You can start the cleaning process manually if there is a print quality problem.

Clean the print head and ink cartridges if you get a horizontal line or blank text in the text or graphics on your printed pages. You can clean Black only, three colors at a time (Yellow/Cyan/Magenta), or all four colors at once.

Cleaning the print head consumes ink. Cleaning too often uses ink unnecessarily.

CAUTION

DO NOT touch the print head. Touching the print head may cause permanent damage and may void the print head's warranty.

a Press Ink.

b Press a or b to choose Cleaning. Press OK.

c Press a or b to choose Black, Color or All.

Press OK.

The machine cleans the print head. When cleaning is finished, the machine will go back to standby mode automatically.

Note

If you clean the print head at least five times and the print has not improved, try installing a new Genuine Brother Brand replacement cartridge for each problem color. Try cleaning the print head again up to five more times. If the print has not improved call Brother Customer Service (see Brother numbers on page i).

Troubleshooting and Routine Maintenance

Checking the print quality

If faded or streaked colors and text appear on your output, some of the nozzles may be clogged. You can check this by printing the Print Quality Check Sheet and looking at the nozzle check pattern.

a

b Press a or b to choose Test Print. Press OK.

c Press a or b to choose Print Quality. Press OK.

d Press Color Start.

The machine begins printing the Print

Quality Check Sheet.

e Check the quality of the four color blocks on the sheet.

f Do one of the following:

 

„ If all lines are clear and visible, press

B

 

+ to choose Yes, and go to step j.

 

 

„ If you can see missing short lines as

 

 

shown below, press - to choose No.

 

OK

Poor

 

g The LCD asks you if the print quality is OK for black and the three colors. Press + (Yes) or - (No).

h The LCD asks you if you want to start cleaning.

Press + (Yes).

The machine starts cleaning the print head.

83