
PhotoCapture Center®: Printing photos from a memory card or USB Flash memory drive
The machine detects eyes in your photos and will attempt to remove
Note
There are some cases when
•When the face is too small in the image.
•When the face is turned too far up, down, left or right.
a Make sure you have put a memory card
or USB Flash memory drive in the proper slot.
Press (Photo Capture).
b Press a or b to choose Enhance Photos. Press OK.
c
d Press a or b to choose Remove
When Remove
When Remove
Unable to Detect. is shown.
You can convert your photo to black & white.
a Make sure you have put a memory card
or USB Flash memory drive in the proper slot.
Press (Photo Capture).
b Press a or b to choose Enhance Photos. Press OK.
c Press d or c to choose your photo. |
|
Press OK. | 5 |
d Press a or b to choose Monochrome. Press OK.
e Press OK. Then press + or - repeatedly to enter the number of copies you want.
f
Press OK to go back to the previous level.
Note
Press a to try Remove
e Press + or - repeatedly to enter the number of copies you want.
f Do one of the following.
Press OK and change the print settings. (See page 45.)
If you do not want to change any settings, press Color Start to print.
41