You can change the copy settings temporarily for the next copy.
These settings are temporary, and the machine returns to its default settings 1 minute after copying.
If you have finished choosing settings, press Black Start or Color Start.
If you want to choose more settings, press a or b.
Note
You can save some of the settings that you use most often by setting them as default. These settings will stay until you change them again. (See Setting your changes as the new default on page 32.)
Changing copy qualityYou can choose the copy quality. The factory setting is Normal.
Fast | Fast copy speed and lowest |
| amount of ink used. Use this |
| setting to save time (documents to |
| be proof read, large documents or |
| many copies). |
|
|
Normal | Recommended setting for ordinary |
| printouts. Good copy quality with |
| adequate copy speed. |
|
|
Best | Use this setting to copy precise |
| images such as photographs. The |
| highest resolution and slowest |
| speed. |
|
|
a Load your document.
b Enter the number of copies you want. c Press a or b to choose Quality.
d Press d or c to choose Fast, Normal or Best.
Press OK.
e If you do not want to change additional settings, press Black Start or
Color Start.
Making copies
Enlarging or reducing the image copiedYou can choose an enlargement or reduction ratio.If you choose Fit to Page, your machine will adjust the size automatically to the paper size you set.
a Load your document. |
| |
b Enter the number of copies you want. | 4 | |
c Press a or b to choose | ||
| ||
Enlarge/Reduce. |
|
d Press d or c to choose Enlarge, Reduce, Fit to Page,
e Do one of the following.
If you choose Enlarge or Reduce press OK and press d or c to choose the enlargement or reduction ratio you want. Press OK and go to step f.
If you choose
If you choose 100% or
Fit to Page, press OK. Go to step f.
100%
198% 4"x6"iA4
186% 4"x6"iLTR
104% EXEiLTR
97% LTRiA4
93% A4iLTR
83%
78%
46% LTRi4"x6"
Fit to Page
27