Troubleshooting and Routine Maintenance

 

 

 

 

 

Error Message

Cause

Action

 

No Paper Fed

The machine is out of paper or

Do one of the following:

 

 

paper is not properly loaded in

„ Refill the paper in the paper tray, and

 

 

the paper tray.

 

 

then press Black Start or Color Start.

 

 

 

 

 

 

„ Remove the paper and load it again

 

 

 

and then press Black Start or

 

 

 

Color Start. (See Loading paper and

 

 

 

other print media on page 9.)

 

 

 

 

 

 

The Jam Clear Cover may not be

Open the jam clear cover and then close it.

 

 

closed properly.

Make sure the jam clear cover is closed

 

 

 

properly.

 

 

 

 

 

 

The paper is jammed in the

Remove the jammed paper by following

 

 

machine.

the steps in Printer jam or paper jam

 

 

 

on page 76.

 

 

 

 

 

Out of Memory

The machine's memory is full.

Copy operation in progress

 

 

 

Press Stop/Exit and wait until the other

 

 

 

operations in progress finish and then try

 

 

 

again.

 

 

 

 

 

 

The memory card or USB Flash

Delete unused files from your memory card

 

 

memory drive you are using does

or USB Flash memory drive to make some

 

 

not have enough free space to

free space and then try again.

 

 

scan the document.

 

 

 

 

 

 

Paper Jam

Paper is jammed in the machine.

Open the Jam Clear Cover (at the back of

 

 

 

the machine) and pull out the jammed

B

 

 

paper by following the steps in Printer jam

 

 

or paper jam on page 76. Make sure the

 

 

 

paper length guide is set to the paper side.

 

 

 

 

 

Unable to CleanXX

The machine has a mechanical

Open the scanner cover and look inside

 

Unable to Init. XX

problem.

the machine for foreign objects and paper

 

–OR–

scraps. If the error message continues,

 

Unable to Print XX

disconnect the machine from the power for

 

A foreign object such as a clip or

 

Unable to Scan XX

several minutes, then reconnect it.

 

ripped paper is in the machine.

 

 

 

Unusable Device

A broken device has been

Unplug the device from the USB direct

 

Disconnect device from

connected to the USB direct

interface, then press On/Off to turn the

 

front connector & turn

interface.

machine off and then on again.

 

 

 

 

machine off & then on

 

 

 

Unusable Device

A USB device or USB Flash

Unplug the device from the USB direct

 

Please Disconnect USB

memory drive that is not

interface.

 

supported has been connected

 

 

Device.

to the USB direct interface.

 

 

 

(For more information, visit us at

 

 

 

http://solutions.brother.com)

 

 

 

 

 

 

Wrong Paper Size

Paper is not the correct size.

Check that the machine's Paper Size

 

 

 

setting matches the size of paper in the

 

 

 

tray. (See Paper Size on page 22.)

 

 

 

 

 

75