f Put the drum unit and toner cartridge assembly into a plastic bag and seal the bag.
g Close the front cover.
h Put the styrofoam piece marked “FRONT” into the original carton (1). Pack the drum unit and toner cartridge assembly (2) and put it in as shown below (3). Wrap the machine in the plastic bag and put it in the original carton (4). Put the printed material behind the machine (5).
Troubleshooting and routine maintenance
i Take the two styrofoam pieces and match the front of the machine to the “FRONT” mark on the one of the styrofoam pieces, and the back of the machine to the “REAR” mark on the other styrofoam piece (6). Put the AC power cord and printed materials in the original carton as shown below (7).
C
j Close the carton and tape it shut.
103