Tray selection
You can change the Tray Use only for the next copy.
a
b Use the dial pad to enter the number of copies (up to 99).
c Press Tray Select.d Press d or c to choose the MP>T1,
T1>MP, #1(XXX) 1 or MP(XXX) 1. Press OK.
e Press Start.
Press | MP>T1 or M>T1>T2 | |
|
|
|
|
| T1>MP or T1>T2>M |
|
|
|
|
| #1(XXX) 1 |
|
| |
|
| #2(XXX) 1 |
|
| MP(XXX) 1 |
1XXX is the paper size you set in Menu, 1, 1, 2.
Note
•T2 or #2 appears only if the optional paper tray is installed.
•To change the default setting for Tray Select, see Tray Use in copy mode on page 23.
Making copies
Out of memory message
If the memory becomes full while you are making copies, the LCD message will guide you through the next step.
If you get an Out of Memory message while scanning a subsequent page, you will have the option to press Start to copy the pages scanned so far, or to press Stop/Exit to cancel the operation.
5
39