IMPORTANT

To prevent damage to the machine caused by static electricity, DO NOT touch the electrodes shown in the illustration.

Note

The LCD names for the paper trays are as follows:

Standard paper tray: Tray 1

Optional lower tray: Tray 2

Multi-purpose tray: MP Tray

Paper is jammed in the MP tray

If the LCD shows Jam MP Tray, follow these steps:

a Remove the paper from the MP tray.

b Remove any jammed paper from in and around the MP tray.

c Close the MP tray. Then open the front cover and close it to reset the machine. Open the MP tray again.

Troubleshooting and routine maintenance

d Fan the paper stack, and then put it back in the MP tray.

e When loading paper in the MP tray, make sure that the paper stays under the maximum paper height guides on both sides of the tray.

Paper is jammed in Paper Tray 1 or Tray 2

If the LCD shows Jam Tray 1 or

Jam Tray 2, follow these steps:

C

a Pull the paper tray completely out of the machine.

For Jam Tray 1:

81