3 Control Panel

LEDs (Light Emitting Diodes)

This section refers to four LEDs Toner, Drum, Error, Ready and Go button on the control panel.

1 Toner LED

3

1

The Toner LED indicates that the Toner is low.

 

2Drum LED

2

3

4

The Drum LED indicates that the Drum will need to be replaced soon.

3Error LED

The Error LED indicates when the machine is in one of the following states:

No paper / Paper jam / Cover open

4Ready LED

5

The Ready LED will flash depending on the machine status.

5 Go button

Wake-up / Error recovery / Form feed / Job Cancel / Reprint / Enable or Disable the wireless network (HL-2135W / HL-2270DW only)

The LED indications shown in the table below are used in the illustrations in this chapter.

LED is off.

or or

LED is on.

The LED is dimmed.

LED is flashing.

or or

53