CHAPTER 5 MAINTENANCE

✒Notes

∙When you install less than two DIMMs, be sure to install them in the order Slot 1and then Slot2.

∙When you install different capacities of DIMMs, be sure to install the larger capacity DIMM in Slot1 and smaller capacity DIMM in Slot2.

6.Refit the main controller board into the printer by sliding it into the guide rails.

Fig. 5-55 Refit the Main Controller board

7.Secure the main controller board with the two screws.

8.Reconnect the printer cable from your computer. Plug the power cord into the AC outlet and turn on the printer.

9.To check whether the DIMM has been installed correctly, you may perform a Test Print “Print Configuration” that will print the current memory size.

5-45