CHAPTER 4 CONTROL PANEL

If DEVICE is selected,

 

 

 

 

 

Display Message

Card Operation

 

 

 

FORMAT DEVICE

Format a new flash memory card, HDD card

 

or optional HDD.

 

Exit

Exit to DEVICE OPERATION

 

 

 

When the display shows “FORMAT DEVICE,” press the Set button to format the installed card.

After the printer finishes formatting the device, you must exit to the “DEVICE OPERATION” menu.

✒Notes

∙When the card is formatted, data that was previously written is erased.

∙It takes ten or more seconds to format a 2-Mbyte flash memory card, HDD card or optional HDD. The larger the capacity of the device, the longer time it takes to format.

When the installed flash memory card, HDD card or optional HDD is formatted:

When you enter this mode menu with a formatted device installed, the display shows the following menus:

Display Message

Card Operation

DEVICE 1

Select Card 1.

DEVICE

2

Select Card 2.

 

 

 

DEVICE

3

Select optional HDD.

After you have selected the card, the display shows the following messages:

Display Message

Flash Operation

EXECUTE DATA

Select the data ID and execute the selected data.

 

This menu appears only when data has been saved

 

on the card.

DEVICE LIST

Print the contents of the flash memory, HDD card

 

or optional HDD. This menu appears only when

 

something has been saved in the device.

SAVE

Save received data, macros and fonts.

 

 

DELETE

Delete items from the device.

4–35