Brother HL-2400Ce Signal Description

APPENDICES

Signal Description

Pin No.	Signal Name	IN/OUT	Explanation
1	DATA STROBE	IN	Data is latched at the leading edge of this
			signal.
2 - 9	DATA 0 - 7	IN	Parallel 8 bit data
10	ACKNLG	OUT	Data reception is completed and the printer is
			ready for the next data reception when this
			signal becomes low.
11	BUSY	OUT	The printer cannot receive data when this
			signal is high. The signal becomes high under
			data receiving, off-line, or error states.
12	PE	OUT	This signal becomes high when a paper
			empty state is detected.
13	SLCT	OUT	This signal becomes high when the printer is
			selected and low when it is deselected.
		IN	This signal is used only for the bi-directional
14	AUTO FEED
			interface.
		IN	This signal is used only for the bi-directional
31	INPUT PRIME
			interface.
		OUT	This signal becomes low when the printer is
32	FAULT
			in the paper empty, off-line, or error states.
		IN	This signal is used only for the bi-directional
36	SLCT IN
			interface.

Appendix–9