Brother HL-2400Ce OIL EMPTY, ***** SIZE, ***** SIZE, CHANGE FCR, WASTE TONER, XX LOAD PAPER, 19 CHECK FONT, NO FUSER UNIT, T1 MANUAL FEED, 27 NO OPC BELT, 20 FONT REMOVAL

USER’S GUIDE

Operator Call Message	Meaning	Action
XX LOAD PAPER	The wrong size of paper was	Load the requested size of
***** SIZE	loaded in the Media Cassette.	paper in the Media Cassette
	XX is T1/ T2.	and press the Form Feed
		button.

T1 MANUAL FEED

***** SIZE

The printer is requesting you to load paper manually.

Load the requested size of paper on the Standard Media Cassette and press the Sel button.

19 CHECK FONT

An error occurred in the optional font card.

Turn off the printer, and reinstall or replace the optional font card.

20 FONT REMOVAL The PCMCIA card was removed while the printer is on-line.

Turn off the printer, install the card, and turn on the printer. The Continue button will allow you to temporarily ignore this message.

22	WASTE TONER	The Waste Toner Pack is full.	Replace the Waste Toner Pack
			with a new one.
23	OIL EMPTY	The Oil in the Oil Bottle is	Replace the Oil Bottle with a
		empty.	new one.
24	CHANGE FCR	It is time to replace the Fuser	Replace the Fuser Cleaner
		Cleaner.	with a new one.
25	NO FUSER UNIT	The Fusing Unit is not	Install the Fusing Unit
		installed correctly.	correctly.

27 NO OPC BELT	The OPC Belt Cartridge is not
	installed correctly.

Install the OPC Belt Cartridge correctly.

28 NO FC ROLLER The Cleaning Roller is not	Install the Cleaning Roller
installed correctly.	correctly.

6–2