Brother HL-2400Ce manual 74

USER’S GUIDE

Mode Menu (Continued)		Setting Menu	Sub-Setting Menu	Setting
INTERFACE		I/F AUTO	MIO Setting	Available only when a commercial
MODE		(Continued)		MIO card has been installed. The
(Continued)				settings available on the installed MIO
				card can appear under the sub-setting
				menu.
FORMAT MODE		ORIENTATION	ORI=PORTRAIT	PORTRAIT or LANDSCAPE
		AUTO MODE	AUTO LF=OFF	ON … LF + CR
				OFF … CR only
			AUTO CR=OFF	ON … LF, FF, or VT + CR
				OFF … LF, FF, or VT only
			AUTO WRAP=OFF	ON … Auto wrap on
				OFF … Auto wrap off
			AUTO SKIP=ON	ON … Auto FF at bottom margin
			(HP mode)	OFF … No FF at bottom margin
			AUTO MASK=OFF	ON … Auto mask on
			(EPSON & IBM modes)	OFF … Auto mask off
			exit	Exit to AUTO MODE
		PAGE FORMAT MODE	PAPER =LETTER	LETTER, LEGAL, A4, A5,
			(For 120V model)	B5, EXECUTIVE, JIS B5,
			PAPER =A4	COM10 and DL
			(For 220/240V model)
			LEFT M = 0C	0 to 126 columns
			RIGHT M = 80C	10 to 136 columns
			(Letter, Portrait)
			RIGHT M = 78C	10 to 136 columns
			(A4, Portrait)
			TOP M =0.5” (HP mode)	0, 0.33, 0.5, 1.0, 1.5, or 2.0”
				(0,8.4, 12.7, 25.4, 38.1 or 50.8 mm)
			BOTTOM M=0.5”	0, 0.33, 0.5, 1.0, 1.5, or 2.0”
			(HP mode)	(0,8.4, 12.7, 25.4, 38.1 or 50.8 mm)
			LINES = 60L	5 to 128 lines/page
			(HP, Letter, Portrait)
			LINES = 64L	5 to 128 lines/page
			(HP, A4, Portrait)
			X OFFSET= 0	-500 (left) to +500 (right) dots
			Y OFFSET= 0	-500 (down) to +500 (up)
				dots
			exit	Exit to PAGE FORMAT MODE
		COLOR MODE	COLOR PRINT = ON...Enable color printing
			ON	OFF...Monochrome print mode
		exit		Exit to FORMAT MODE
RESOLUTION MODE		RESOLUTION	RESOLUTION	300 or 600 dpi
		HRC SETTING	HRC=MEDIUM	OFF, LIGHT, MEDIUM, or DARK
		exit		Exit to RESOLUTION MODE
PAGE PROTECTION		PROTECT=AUTO		AUTO, OFF, LETTER, A4, or LEGAL
DEVICE OPERATION		When the commercial flash memory card, HDD card or optional HDD has not been formatted:
(HP mode only) FORMAT DEVICE				Format the flash memory card, HDD card
DEVICE1				or optional HDD.
DEVICE2
DEVICE3
	exit
		Exit		Exit to DEVICE OPERATION

4–10