CHAPTER 4 CONTROL PANEL

14.When you enter the character set setting mode, the display first shows the current character set with an asterisk.

✒Note

The character set varies according to the current emulation mode.

15.Press the ▲ or ▼ button until the character set you want appears on the display.

See “ List of Symbol/Character Sets”.

16.Press the Set button to make the displayed selection effective. Then the display shows the next menu.

17.Press the Set button to start printing the code table of the selected font, or press the ▲ or ▼ button to skip this menu. Then the display shows the exit menu.

18.Press the Set button to exit from the setting mode. The printer returns to the off-line state.

4–57