CHAPTER 5 MAINTENANCE

The following capacity of DIMM can be installed:

• 16 Mbyte

TECHWORKS

PM-HP 16M-BR

• 32 Mbyte

TECHWORKS

PM-HP 32M-BR

• 64 Mbyte

TECHWORKS

PM-HP 64M-BR

• 128 Mbyte

TECHWORKS

PM-HP 128M-BR

In general, the DIMM must have the following specifications:

Type:

100 pin and 32 bit output

CAS Latency:

2 or 3

Clock Frequency:

66Mhz or more

Capacity:

16,32, 64 or 128 Mbyte

Height:

46mm (1.8 inches) or less

Parity:

NONE

Dram Type:

64 M bit SDRAM 4 Bank

SDRAM can be used.

✒Notes

∙There might be some DIMMs which will not work with this printer.

∙For more information, consult the dealer where you purchased the printer.

∙For the latest information: http://www.brother.com

To install DIMMs, follow these steps:

1.Turn off the printer and unplug the power cord from the AC outlet.

✒Note

Be sure to turn off the power to the printer before installing or removing the DIMMs.

5-43