4-18
☛
☛☛
☛ 11. Open the upper right cover (①) of the Interchange unit and slide the
Interchange unit to the left while keeping the Upper cover right
perpendicular to the printer (②). Confirm that the projection (③) locates in
the hole as shown in the illustration.
1
3
1
2
Fig. 4-26
☛
☛☛
☛ 12. Fasten the two screws finger tight and secure the Interchange unit to the
printer. Use a coin to tighten the screws.
ZAEP161E
Fig. 4-27
☛
☛☛
☛ 13. Close the Upper right cover of the Interchange unit.
ZAEP162E
Fig. 4-28