CHAPTER 4 OPTIONS
4-19
☛
☛☛
☛ 14. Close the Right cover by pushing the area as shown in the illustration.
ZAEP170E
Fig. 4-29
☛
☛☛
☛ 15. If a mailbox unit is not to be installed, attach the Interchange unit cover that
was removed in step 9. Attach the side of the cover facing the front of the
printer first (①) and then the other side of the cover (②).
✒ Note
To attach the mailbox, go to Installing the Mailbox, Step 6.
ZAEP180E
Fig. 4-30
☛
☛☛
☛ 16. Attach the connector of the Interchange unit to the socket on the back of the
printer as shown in the illustration.
ZAEP190E
Fig. 4-31