Brother HL-3260N

USER’S GUIDE

3-6

If you want to reprint a document that has just been printed, you can reprint

it by pressing the Reprint switch. Also, if you have created a document that

you wish to share with colleagues, simply spool the document to a non-

secure area of the printer. This document can then be re-printed by anyone

who is on the network or at the printer Control panel.

You can use the reprint function when the printer is READY or in the settings

menu.

When you want to print PROOF, PUBLIC or SECURE data, we recommend

installing the optional HDD or Compact Flash.

If you do not install an HDD (See HDD in Chapter 4) or Compact Flash Card

(see Compact Flash Card in Chapter 4), you can reprint from RAM.

When you use RAM to reprint;

☛

☛☛

☛ 1. Press the Set switch on the Control panel to exit from the READY status and

select RAMDISK SIZE in the SETUP mode.

☛

☛☛

☛ 2. The default RAM is 0MB. Press the + switch to increase the reprint RAM

size in 1MB steps.

✒

✒✒

✒

Notes

• When you increase the RAM size to use for secure printing, the work

area of the printer is decreased and the printer performance will reduce.

Ensure that you reset the RAMDISK SIZE to 0MB when you have

finished using secure printing.

• When you store the data in RAM, the data is deleted when the printer

power is turned off.

We also recommend adding additional RAM when you want to secure print a

large amount of data. (See RAM expansion in Chapter 4)