CHAPTER 4 OPTIONS
4-49
☛
☛☛
☛ 13. If the Duplex unit is already attacked, close the unit.
Fig. 4-83
☛
☛☛
☛ 14. Remove the adhesive tape holding the Bridge unit and cable and packing
material, and attach the connector to the socket on the right top side of the
back of the printer.
☛
☛☛
☛ 15. Attach the secur ing plate as shown in the illustration.
✒ Note
The plate fastens with a screw when installing the Finisher.
Fig. 4-84