4-34
☛
☛☛
☛ 10. Use the Allen key to fasten the 2 screws to secure the Multi-purpose tray to
the holder. Fasten the screws in the order shown in the illustration. (①→②)
ZAEP310E
Fig. 4-56
☛
☛☛
☛ 11. Remove the adhesive tape holding the Multi-purpose tray and cable, and
attach the connector to the socket on the bottom left hand side of the back
of the printer.
ZAEP320E
Fig. 4-57
✒ Note
• Keep the Allen key in the housing inside the front cover. Only one Allen
key can be kept in the housing.
ZAEP541E
Fig. 4-58