Brother HL-3260N - page 87

CHAPTER 3 CONTROL PANEL
3-3
G
GO O s sw wi it tc ch h
You can change from the current status (MENU, ERROR and REPRINT
settings) by pressing the Go switch once. For ERROR indications, the panel
will change only when it is possible to clear the error.
You can PAUSE printing with the Go switch during a print job. Pressing the
Go switch again makes the print job restart and clears the PAUSE. During
PAUSE, the printer is in the off-line state.
✒
✒✒
✒ Note
If you do not wish to print the remaining data when the printer is in PAUSE,
you can cancel the job by pressing the Job Cancel switch before pressing
the Go switch to clear the PAUSE.