CHAPTER 4 OPTIONS
4-45
☛
☛☛
☛ 2. Turn off the printer and remove all cables and cords from the printer.
☛
☛☛
☛ 3. Remove the adhesive tape.
!
Caution
Do not remove the adhesive tape (①) holding the cable and the Bridge unit,
until the Bridge unit is attached in step 14.
1
Fig. 4-73
☛
☛☛
☛ 4. If you installed the Duplex unit, open the Duplex unit by lifting the catch.
Fig. 4-74