Brother HL-3400CN Replacing the Transfer Roller

USER’S GUIDE

Replacing the Transfer Roller

1.Release the Transfer Roller Lock Lever and lift the Lever to release the Transfer Roller.

Fig. 5-31 Releasing the Lock Lever

2. Remove the Transfer Roller.

Fig. 5-32 Taking out the Transfer Roller

3.Install the new Transfer Roller by holding the Lock Levers of the Transfer Roller and adjusting the angle of the Transfer Roller Lever Shafts (both sides) to match the Transfer Unit groove. Set the Transfer Roller onto the shafts and place the Roller onto the springs.

5-28

Fig. 5-33 Installing the Transfer Roller