CHAPTER 4 CONTROL PANEL

 

 

 

 

Display Message

Parameters

Settings

 

 

 

 

 

DTR(ER) =ON

Data terminal ready

ON:

Makes DTR (ER) low when

(Effective when

(ER)

 

the buffer is full.

 

OFF: Does not make DTR (ER)

Xon/Xoff=ON)

 

 

 

low when the buffer is full.

 

 

 

 

 

 

DTR(ER) goes low only

 

 

 

when the printer is off-line.

 

Robust Xon =OFF

Robust Xon

ON:

Sends Xon while waiting.

(Effective when

 

OFF: Sends Xon once, when the

 

 

 

 

Xon/Xoff=ON)

printer status changes from off-line to on-line.

■Extended I/O Interface

If you have installed a commercial modular input/output (MIO) card in the printer, you can select the extended I/O interface in this mode. If the installed MIO card requires any optional interface settings, they appear under this menu. To set them up, referring to the manual for the MIO card.

✒Note

This setting appears only when an MIO card has been installed. For installation of the MIO card, see the Network manual.

The network card may be pre-installed on some HL-3400CN series models.

4–21